Select Page

Downsizing Your Program with Larger Electrical power Chains
HK kind roller chains conform to H sort of ANSI, and their thickness of inner and outer hyperlink plates are equal to individuals of the upcoming greater dimension chain. Consequently, HK kind roller chains are larger in tensile power by about 20%and in highest allowable load by about 15% than those of standard roller chains. Since the weight from the chains can be larger, HK kind roller chains are appropriate for the application of heavy duty at reduced speed.
Suggested uses
?Optimum for places the place larger strength is required but huge and heavier chains can’t be used.
Choice of chains
Pick a correct HK kind roller chain dependant on “Low-speed selection”
For that highest allowable load, see the next table of dimensions.
HK style roller chains are available as much as triplex.
Sprockets
Use normal sprockets for any simplex HK roller chain Since the transverse pitches are bigger than those of regular chains in the case of duplex or triplex, normal sprockets are unable to be employed. Refer on the sprocket tooth profiles for HK
Connecting website link and offset website link
The tensile power of connecting hyperlinks and offset hyperlinks are listed to the left, however the greatest allowable load is reduce than that of the base chain. Please seek advice from us should really you might have any inquiries. It is recommended to implement the connecting hyperlink of interference-fitted (FJ, HJ)
In no way make the holes in the connecting plate bigger and never ever make the pins thinner to facilitate the function for fitting the pins into the connecting plate, because otherwise the fatigue power will likely be lowered.
Selection of chains
Choose a appropriate HK variety roller chain depending on “Low-speed selection”
For that optimum allowable load, see the next table of dimensions.
HK form roller chains can be found up to triplex.
Sprockets
Use typical sprockets to get a simplex HK roller chain Since the transverse pitches are greater than people of common chains while in the case of duplex or triplex, standard sprockets can not be made use of. Refer towards the sprocket tooth profiles for HK
Connecting hyperlink and offset link
The tensile strength of connecting links and offset hyperlinks are listed to the left, however the highest allowable load is reduce than that with the base chain. Please check with us should you might have any questions. It is recommended to make use of the connecting hyperlink of interference-fitted (FJ, HJ)
Never ever make the holes of the connecting plate larger and by no means make the pins thinner to facilitate the perform for fitting the pins in to the connecting plate, considering the fact that otherwise the fatigue strength is going to be lowered.