Select Page

Leaf chains consist of pins and plates only and are greater in power than roller chains. They are really suitable for tasks like hoisting and pulling. Leaf chains conform to ANSI and have two forms: AL and BL.
AL variety
For the use that static load is applied with very little concern of wearing.
BL kind
For your use that wear resistance is needed since impact load is applied.
Selection of leaf chains
The chain dimension is picked in accordance for the following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable stress Notes:
one. Acting stress includes the dead weight of your chain, the excess weight with the attachments and inertia.
two. When the chain velocity exceeds thirty m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimal width concerning flanges: L = Overall length of pin?¨¢1.05
?If connecting pins are provided: L¡§R2L1?¨¢1.05
F.D = S.D + Greatest link plate height (H) Note:?If dimension H exceeds 25.four,
F.D = S.D + 25.four can be adopted as the minimal flange outer diameter.
Periodical inspection and instructions for replacement
Be sure to perform periodical inspection and lubrication to verify safety and prolong chain daily life. Problems and guidelines for answer are outlined during the following.
Difficulty:Circumferential wear of plate
Answer:Change the chain if put on reduction gets 5 percent of H.
Difficulty:Oblique put on of plate and pin head
Alternative:Align the unit.
Trouble:Abnormal protrusion or rotation of pin head
Remedy:Change the chain Lubricate and eliminate overload.
Issue:Put on elongation
Option:Substitute the chain when its length becomes 1.03L. Note: Wear elongation of a
chain lowers its tensile strength.
Dress in elongation of 3% lowers the tensile strength by 18 percent.
The put on daily life of chain is usually improved by lubrication. Replace the chain.
Problem:Cracked plate (one)Crack: In the hole of a hyperlink plate towards the end of your hyperlink plate within the direction perpendicular to tension path.
Solution:Replace the chain which has a chain of increased optimum allowable stress, or decrease the load or dynamic (shock) load.
Difficulty:Cracked plate (two)Crack: In an oblique path towards tension path.
Answer:Replace the chain, and protect from corrosive situations.
Issue:Broken plate(by large tension)
Resolution:Substitute the chain, and remove the induce of overload.
Issue:Enlarged plate hole
Answer:Substitute the chain, and do away with the induce of overload.
Issue:Corrosion of pit
Alternative:Substitute the chain, and guard from corrosive situations.