Select Page

For Use at Low-temperature
When employing conveyor chains at low-temperature this kind of as in a refrigerator or in the cold environment, the next ailments may well come about.
1) Minimal temperature brittleness
Normally, a material is embrittled at low-temperature and shock resistance is lowered. This phenomenon is known as low-temperature brittleness, as well as the degree of embrittlement differs from materials to materials.
The support restrict of a conveyor chain is determined by its specifications.
two)Influence of freezing
At low-temperature, bending failure, roller rotation failure, repairing of chain, and so forth. may be induced through the freezing of penetrated water or deposited frost during the clearance concerning pins and bushings, bushings and rollers or inner plates and outer plates. These problems bring about an overload to act around the chain and drive, diminishing the lifestyle of your chain.
To prevent freezing, generally, it can be suggested to fill the clearances that has a low-temperature lubricant suitable for the service temperature to stop water, frost, and so forth. from penetrating the respective portions with the chain. For lubrication, a silicon based grease is encouraged.
For Use at High-temperature
Chains strength is diminished by high-temperature ambiance, direct conveying of high-temperature loads, or radiated heat, etc. The service limit at high-temperature depends not around the temperature on the support environment but the temperature and material with the chain physique.
Following circumstances might come about when chains are made use of at high-temperature:
1) High temperature brittleness and fracture by lowered hardness of heat handled material
two) Brittleness brought about by carbide precipitation
three) Abnormal dress in by scale
four) Fatigue fracture induced by repeated thermal shock (cooling and growth)
five) Abnormal wear resulting from a rise in the coefficient of friction
six) Creep fracture
seven) Fracture resulting from thermal fatigue of welded area
eight) Effects brought on by thermal expansion
?Stiff back links and rotation failure resulting from decreased clearance ?Fatigue fracture due to lowered fitting force
9)Lubrication failure and stiff back links resulting from deterioration and carbonization of lubricating oil
Grease excellent in heat resistance consist of people dependant on silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are advisable.