Any harm to the teeth surfaces of the sprocket diminishes the lifestyle on the conveyor chain.
With conventional sprockets, considerably worn sprocket teeth had been repaired by teeth padding or even the total sprocket was replaced. In both situation, restore was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for your dramatic cost savings in price and time.
Framework
The teeth might be replaced by two procedures: personal tooth substitute or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated to the right.
The above photo 
as well as major appropriate illustration present a sprocket for individual tooth replacement. Since the joint encounter amongst the replaced teeth along with the sprocket is formed within a exclusive arc, the bonding accuracy is higher as well as the sprocket power is enhanced. On top of that, since the load acting within the mounting bolts is decreased, there exists much less likelihood of loosening. This sprocket building is patented.
There are actually two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for large sprockets obtaining heavy loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags: