Equipped with the zero leak bidirectional checking sole-noid valves, this power unit is intended for your operation of two independent circuits. Which are respectively for that primary and subordinate platforms in the double scissors lift. Two cut-off valves are employed for lowering the machine manually in situation of power reduction. If far more independent circuits are necessary for your application please speak to us for availability.
Remark: 1. Please seek the advice of our product sales engineer for that distinct pump displacement, motor energy or tank capacity.
two. CSA or UL certified motors can be found upon request.
1. The AC motor is of S3 duty cycle, which may only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic elements concerned just before installation of the energy unit.
three. Viscosity of the oil shoud be 15~46 cst,as well as the oil should really be clean and free of impurities,N46 hydraulic oil is proposed.
4. The power unit need to be mounted vertically.
five. Check the oil degree in the tank right after the initial working of the energy unit.
six. Oil altering is required just after the first a hundred operation hrs,afterwards after every single 3000 hours.
Electrical power UNITS FOR DOUBLE-SCISSORS LIFT