Select Page

TF Style Flanges
Model TF flanges are created from the same high-strength cast iron since the S flanges, but are made to accommodate the global normal Taper Lock bushing for simple installation and elimination
TF Kind flanges allow for mounting the bushing over the front (hub) side of the flange
TF flanges are available in sizes 6 through sixteen and might be used with any type of sleeve as pictured on webpage SF-5
TR Style Flanges
TR flanges are related to your TF design, but let for your Taper Lock Bushing to be mounted and eliminated from
the reverse or serration side of your flange
The limited torque ratings from the Taper Lock Bushings let TR flanges to only be used with EPDM or Neoprene sleeves
Diverse bushing sizes are utilised, so they’ve unique greatest bores than the TF flanges
Sizes six by way of sixteen can be found
Taper-Lock Bushings
The marketplace normal taper lock bushing is often a split design permitting a compression match with the flange for the shaft without set screws
The easy style tends to make the installation and removal quick while the 8° taper grips tight and supplies fantastic concentricity
A Diminished level of inventory may be achieved on account of the numerous other electrical power transmission elements that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
does not offer you the Taper-Lock Bushings themselves as these are widely obtainable from other manufacturers